Configuring QOS on an HP Procurve Switch

In order to create a new QOS policy:

  1. Define a class to match the traffic you wish to limit
  2. Define a policy on how to treat the traffic
  3. Apply the policy on a interface or VLAN

Something like the following should work:

  class ipv4 servers-to-be-slowed
    match ip 1.2.3.4/32 any
    match ip 1.2.3.5/32 any
    exit
  policy qos SlowBadServers
    class ipv4 servers-to-be-slowed action rate-limit kbps 1000
    exit
  interface a1-a2 service-policy SlowBadServers in

“servers-to-be-slowed” is the name of the class, and “SlowBadServers” is the name of the QOS policy.

  • switches/procurve_qos.txt
  • Last modified: 2019/03/15 18:15
  • by ericclaus